Underground Construction and Tunnelling

1. Centricrete UF
   Mineral-based suspension for injection. Low viscosity, stable in mixing, high volume stability, very good compressive and bending tensile strength. TDS
2. MC-DUR 1000 Parat 04
   Ready for application, shrinkage-free on hardening, two-component epoxy resin repair mortar, highly resistant to extreme temperatures. TDS
3. MC-DUR 1000 Parat 09
   Pigmented, two - component epoxy resin levelling mortar for structural strengthening. TDS
4. MC-DUR 1264 FF - (QDMR approved)
   Two-component injection resin based on epoxy resin. Low viscosity, good capillary climbing ability, moisture-compatible, long processing time, good adhesion to concrete and steel. TDS
5. MC-DUR 1264 KF - (QDMR approved)
   Two-component injection resin based on epoxy resin. Low viscosity, good capillary climbing ability, long processing time, good adhesion to concrete and steel, good chemical resistance. TDS
6. MC-DUR 3500 Series
   Rapid-curing, two-component polymer mortar. Layer thicknesses 3 to 6 mm. Hardens without shrinking. TDS
7. MC-FIX ST
   Hydraulically setting quick mortar. Free of chlorides, watertight, hardens approx. TDS
8. MC-Inject 2033 - (QDMR approved)
   Low viscosity injection foam sets in seconds and increases volume by approx. 40 times. TDS
9. MC-Inject 2300 NV - (QDMR approved)
   Two-component low viscosity, flexible injection resin based on polyurethane. TDS
10. MC-Inject 2700 Series
    Two-component low viscosity, rigid injection resin based on polyurethane. TDS
11. MC-Inject GL 95
    Soft elastic, low viscosity, highly flexible injection resin. TDS
12. MC-Inject GL 95 TX
    Polymer-modified Soft elastic, low viscosity, highly flexible injection resin. TDS
13. MC-Inject TS 07
    Low viscosity resin for water tightening and strengthening. TDS
14. Zentrifix F92
    Two-component, highly polymer-modified polymer-cement mixture for application by hand or by wet spraying. TDS
15. Nafufill GTS
    One-component, polymer-modified SPCC concrete repair compound that can be applied by the dry spraying method. TDS
16. Nafufill KM 250 - (QDMR approved)
    One-component, polymer-modified PCC concrete repair compound that can be applied by hand or by wet spraying. TDS
17. Konudur Kanalinjekt 01
    Rigid fast reacting injection resin in cartridges. TDS
18. Intec Premium
    Slotted injection hose with weaving for multiple injections for EP, PU and AC
19. Intec Cem injection hose
    Perforated injection hose with weaving for multiple injections for PU, AC and cementitious pastes and suspensions.
20. Intec Combi
    Combination of standard injection hose and swellable joint sealant.
21. Permur
    Watertight service penetration system.

---

Fire rated Products

1. Nafufill KM 250 - (QDMR approved)
   One-component, polymer-modified PCC concrete repair compound that can be applied by hand or by wet spraying. TDS
2. MC-Injekt 2300 plus - (QDMR approved)
   Two-component, low viscosity, flexible injection resin. TDS

---

Potable Water

1. MC-APC
   Two-component, cement-based, crack-bridging coating for areas in constant contact with water. TDS
2. MC FIX-ST
   Hydraulically setting quick mortar. Free of chlorides, watertight, hardens approx. one minute after water is added. TDS
3. MC-Inject 2033 - (QDMR approved)
   Low viscosity injection foam sets in seconds increases volume by approx. 40 times. TDS
4. MC-Inject 2300 NV - (QDMR approved)
   Two-component low viscosity, flexible injection resin based on polyurethane. TDS
5. MC-Inject 2700 series
   Two-component low viscosity, rigid injection resin based on polyurethane. TDS
6. MC-Inject GL 95
   Soft elastic, low viscosity, highly flexible injection resin. TDS
7. MC-Inject GL 95 TX
   Polymer-modified Soft elastic, low viscosity, highly flexible injection resin. TDS
8. MC-Inject TS 07
   Low viscosity resin for water tightening and strengthening. TDS
9. Zentrifix F92
   Two-component, highly polymer-modified polymer-cement mixture for application by hand or by wet spraying. TDS
10. MC-RIM PW series
    Cement-bound, mineral-based coating for application in the drinking water area by hand or wet spraying. TDS
11. Konudur Liners and Epoxies(please contact us for further details), Konudur Kanalinjekt 01,
12. Konudur Kanalinjekt 01
    Rigid fast reacting injection resin in cartridges. TDS

---

Waste Water

1. MC-APC
   Two-component, cement-based, crack-bridging coating for areas in constant contact with water. TDS
2. MC FIX-ST
   Hydraulically setting quick mortar. Free of chlorides, watertight, hardens approx. one minute after water is added. TDS
3. MC-Inject 2033 - (QDMR approved)
   Low viscosity injection foam sets in seconds and increases volume by approx. 40 times. TDS
4. MC-Inject 2300 NV - (QDMR approved)
   Two-component low viscosity injection resin based on polyurethane. TDS
5. MC-Inject 2700 series
   Two-component low viscosity, rigid injection resin based on polyurethane. TDS
6. MC-Inject GL 95
   Soft elastic, low viscosity, highly flexible injection resin. TDS
7. MC-Inject GL 95 TX
   Polymer-modified Soft elastic, low viscosity, highly flexible injection resin. TDS
8. MC-Inject TS 07
   Low viscosity resin for water tightening and strengthening. TDS
9. Ombran MHP series
   Highly sulphate - resistant motor for coating and reprofiling. TDS
10. Ombran CL
    Cleaner concentrate for oil contaminated substrates. TDS
11. Ombran FT
    Hybrid motor for coating seperators. TDS
12. Ombran W
    Expanding plugging motor to stop water intrusions. TDS
13. Ombran IW
    Superfast-hardening motor for surface-sealing of water intrusions. TDS
14. Ombran CPS
    Hybrid motor for biogenic sulphuric acid corrosion. TDS
    
15. Konudur Liners and Epoxies
    Please contact us (for further details).
16. Konudur Kanalinjekt 01
    Rigid fast reacting injection resin in cartridges. TDS
17. Cresco
    expanding water stop
18. Intec Premium
    Slotted injection hose with weaving for multiple injections for EP, PU and AC.
19. Intec Cem injection hose
    Perforated injection hose with weaving for multiple injections for PU, AC and cementitious pastes and suspensions
20. Intec Combi
    Combination of standard injection hose and swellable joint sealant
21. Permur service penetration
    Watertight service penetration system.

---

Waterproofing

1. MC FIX-ST
   Hydraulically setting quick mortar. Free of chlorides, watertight, hardens approx. one minute after water is added. TDS
2. MC-Inject 2033 - (QDMR approved)
   Low viscosity injection foam sets in seconds and increases volume by approx. 40 times. TDS
3. MC-Inject 2300 NV - (QDMR approved)
   Two-component low viscosity injection resin based on polyurethane. TDS
4. MC-Inject 2700 series
   Two-component low viscosity, rigid injection resin based on polyurethane. TDS
5. MC-Inject GL 95
   Soft elastic, low viscosity, highly flexible injection resin. TDS
6. MC-Inject GL 95 TX
   Polymer-modified Soft elastic, low viscosity, highly flexible injection resin. TDS
7. MC-Inject TS 07
   Low viscosity resin for water tightening and strengthening. TDS
8. Cresco
   expanding water stop
9. Intec Combi
   Combination of standard injection hose and swellable joint sealant.

---

Surface Protection

1. Betonflair W
   Ready for use, water-based surface protection system, applied by brush, roller or by wet or airless spraying. TDS
2. EmceColor-Flex
   Ready for use, crack-bridging, water-based surface protection system, applied by brush, roller or by wet or airless spraying. TDS
3. Emcephob Basic Cleaner
   Solvent-containing cleaner to remove graffiti and unwanted paintmarkings. TDS
4. Emcephob NanoPerm series
   Two-component, water-based carbonation protection system offering permanent protection against graffiti and dirt can be applied by roller or airless spraying. TDS
5. Emcephob NanoWax
   Ready to use, transparent, water-based, anti-graffiti coating that can be applied by roller or by airless spraying, based on polymer wax dispersions. TDS
6. Emcephob WM
   Ready for use, water-based hydrophobising agent, reduces the take-up of water and increases resistance to deicing salts. TDS
7. MC-APC
   Two-component, cement-based, crack-bridging coating for areas in constant contact with water, can be applied by the wet spraying method. TDS
8. MC-DUR 1277 WV
   Transparent, moisture-compatible, two-component epoxy resin. TDS
9. MC-DUR 2103 M
   One-component, coloured, matt, solvent-containing, crack bridging polyurethane resin binding agent, especially increased UV-resistant and non-yellowing. TDS
10. MC-DUR 2295
    Coloured, self-levelling, two-component polyurethane resin coating for concrete substrates that are driven on and at risk of cracking in interior and exterior parking areas. TDS
11. MC-Schutzueberzug 702
    Ready to use curing. TDS
12. Zentrifix F92
    Two-component, highly polymer-modified polymer-cement mixture for application by hand or by wet spraying. TDS

---

Industrial Flooring

1. Emcefloor series
   One-component, polymer-modified, mineral-based screed mortar. Suitable for the production and repair of composite screeds and screeds with dividers. TDS
2. MC-DUR 111 D
   Coloured, water vapour open, water-dispersed, two-component epoxy resin sealer, dries to a satin finish. TDS
3. MC-DUR 1177 WV-A
   Transparent, water-dispersed epoxy resin. Can be used on highly alkaline mineral substrates. TDS
4. MC-DUR 1200
   Fillable, coloured, self-levelling epoxy resin for high mechanical and chemical loads. TDS
5. MC-DUR 1204
   Transparent, two-component epoxy resin sealer with highly increased UV stability for use in interior areas with high exposure to light. TDS
6. MC-DUR 1209 TX
   As MC-DUR 1200, but thixotropic for vertical areas. TDS
7. MC-DUR 1212 series
   Coloured two-component epoxy resin. Production of epoxy resin sealers and self-levelling coatings on mineral substrates. TDS
8. MC-DUR1252
   Pigmented, UV-resistant, elastic two component epoxy resin. Production of epoxy resin coatings on mineral-based substrates, especially parking decks. TDS
9. MC-DUR 1280
   Duromer adhesive for CPRP-strips and flat-bar steel for structural strengthening in civil engineering. TDS
10. MC-DUR1291-flex
    Crack-bridging coating material. TDS
11. MC-DUR 1390 VK
    Low-viscosity, transparent, two-component epoxy resin Can be used as a primer on mineral substrates, as a binder agent for scratch and levelling coats, for the filling of cracks and to produce floor coatings and reaction resin mortars. TDS
12. MC-DUR 1800 series
    Coloured, two-component coating based on epoxy resin with high resistance to acids, alkalis and solvents. TDS
13. MC-DUR 1850 ESD
    Coloured, two-component epoxy resin coating for ESD floor coverings requiring increased resistance to mechanical and chemical stresses. TDS
14. MC-DUR 1900
    Coloured, two-component, crack bridging epoxy resin coating. Simple to use for smooth and slip-resistant conductive industrial floors. Also as non conductive and high chemical resistance. TDS
15. MC-DUR 2052 AM
    Silicon-free, coloured, self-levelling, two-component polyurethane resin coating for mineral and asphalt-bound substrates exposed to mechanical loadings, e.g., in warehouses, sales and production areas. TDS
16. MC-DUR 2052 UVB
    Coloured, two-component, levelling coat based on polyurethane resin, with increased UV-resistance. For the coating of balconies, loggias and access balconies. TDS
17. MC-DUR 2095 Series
    Coloured, water-dispersed, two-component polyurethane resin to produce electrically conductive satin sealing coats, UV-resistant and open to water vapour diffusion. TDS
18. MC-DUR rapid
    Rapid-curing, two-component, coloured epoxy resin system. MC-DUR rapid is self-levelling and can be used for both smooth and slip-resistant industrial floors. TDS
19. MC-DUR SL
    Visually superior coating system that is especially quick to apply. Application in interior areas in commercial and industrial areas subject to medium mechanical loadings and low chemical stresses. TDS
20. MC-DUR Terrazzo
    Visually highly decorative, thick-layer coating system allowing ample design for representative areas in commerce/industry, and the pharmaceutical and food sectors. TDS
21. MC-DUR VS coloured
    Solvent-containing, coloured, two-component sealer based on epoxy resin, to be applied in two steps. TDS
22. MC-DUR VS/VS-PUR
    Solvent-containing, coloured, two-component polyurethane wearing layer sealer with high resistance to UV, non-chalking and non-yellowing, dries to a satin finish. TDS
23. MC-Duroflake
    Visually superior Dekorchips coating system. Application in interior areas in commercial and industrial areas. TDS
24. MC-Durofloor
    Visually superior Colorquarz coating system, able to withstand high stresses. TDS

---

Joint Sealing

1. Mycoflex 250
   Sprayable, thixotropic, elastic, two-component sealant based on polyurethane. TDS
2. Mycoflex 450
   Sprayable, thixotropic, elastic, two-component sealant based on a fuel and chemical-resistant, carbo-modified polyurethane. TDS
3. Mycoflex 4000 Series
   Sprayable, thixotropic, one-component sealant MS polymer sealant in accordance with DIN 18540. TDS
4. Mycoflex 4100 TS
   Primer for Mycoflex 4000 VE and 4000 SP. TDS
5. Mycoflex BI-Band
   Paintable, prefabricated joint strip made of polysulphide rubber. It is glued with Mycoflex 4000 BIK. TDS
6. Mycoflex Fugenfueller PE
   Polyethylene round profile for joint filling and back-filling in civil engineering above and below ground and the installation of prefabricated components.
7. Mycoflex WW-Band
   Elastic sealing strip based on butyl to glue over joint areas, and especially in waste water and sewage applications. TDS
8. Cresco AC
   expanding water stop.
9. Intec Premium
   Slotted injection hose with weaving for multiple injections for EP, PU and AC.
10. Intec Cem injection hose
    Perforated injection hose with weaving for multiple injections for PU, AC and cementitious pastes and suspensions.
11. Intec Combi
    Combination of standard injection hose and swellable joint sealant.
12. Permur service penetration
    Watertight service penetration system.
13. Nafutekt plus
    Joint sealant in traffic surfaces

---

Grouts

1. Centricrete series
   Mineral-based suspension for injection in connection with Centricrete- Additiv. TDS
2. Emcecrete HP -(QDMR approved)
   High performance grout. TDS
3. Emcecrete RS -(QDMR approved)
   Rapid set grout. TDS
4. Intec Cem injection hose
   Perforated injection hose with weaving for multiple injections for PU, AC and cementitious pastes and suspensions.

---

Concrete Admixtures and Additives

1. Further information will follow soon please contact us directly in the meantime.

---

Injection Devices

1. Reciprocation Pump PN 12
   single component pump.


2. Reciprocating Pump PN 1412 3K
   two component pump 1:1.


3. Reciprocating Pump PN 314 3K
   two component pump 3:1.


4. Double Membrane Pump MCL1


5. Double Membrane Pump MZP-30

---

Injection Packers

1. Bore Packers starting from 6 mm to 144 mm
   Please contact us for further information.


2. Adhesion Packers for low pressure and high pressure injection


3. Hammer Packers


4. Wedge packer


5. Gel packer with extension

---

Mixing technique

1. Mixing device MZ-0


2. Dualspiral Mixer B6

---

Formwork Road Coating

1. Tubbox
   Column formers.
2. Stremaform
   stop-end formwork element combinable with waterbar.
3. Whisper Grip
   Specialist road coating to increase grip and decrease noise in problem areas in tunnels and above ground. TDS